Blogger Widgets
Showing posts with label Glue Sticks. Show all posts
Showing posts with label Glue Sticks. Show all posts

Tuesday, November 13, 2012

DIY - Pretty Acorn Ornament




So if you follow my blog, some of you know that I have a ton of pine tree's, hence my  Pine Cone Decoration. Well, I have a bunch of Oak tree's also. I have several different species of Oaks. And these tree's put out a Gajillion acorns, and I mean a Bazillion!! So I thought, "What can I do with some of these??" ¯\(°_o)/¯   I know!  I'll make a ornament with the little "hats"!  ツ


Millions of em' !!

First I collected, what I thought would be enough (believe me, I didn't even put a dent in them!)...then I cleaned them, by letting them soak for a little while in hot soapy water (Dawn of coarse) Then I rinsed them and let them soak in hot water with some vinegar. Let them dry completely on a paper towel. BTW, I didn't collect enough, had to go out and collect more, several times... (¬_¬)


3" Styrofoam Balls
Craft Foam Ornament Hooks
Package say no glue needed, but I want mine permanent... so I glued it.

Craft Foam Ornament Hooks (back side)
Ribbon

Gold Glitter Glue
Clear Spray Paint
Acorn "Hats"

Here is what you need:

3" Styrofoam Balls
Hooks of some sort (I used Craft Foam Ornament Hooks - see picture above)
Brown Paint (spray paint would be best but I didn't have any, so I used my    craft paint)
Acorn "Hats"
Gold Glitter Glue
Clear Spray Paint
Ribbon
Hot Glue Gun (or any kind of craft glue. Hot glue dries fast)

I got the styrofoam balls, the hooks, the ribbon, clear spray paint and the glitter glue at Walmart, but you can find any of these at a craft store.

Dab some glue on the pointy end of the ornament hook and push it into the styrofoam, paint the styrofoam balls and the hook  brown. (I had to do two coats on the balls.) I used a wire to hold the foam while painting. Spray paint would probably be faster, but I didn't have any on hand. I just used my brown craft paint.




You can see the balls in the background have two coats of paint already.
Let them dry...
Once dry start attaching the Acorn "hats" with hot glue (I left the stems on the "lids", applied glue, and poked it into the styrofoam.


Put a dab of glue on the top of the "hat" and poke into foam.
Push "hats" into the foam.
Continue gluing until the whole ball is covered (if I had big gaps, I used the "not quite formed acorns" to fill in) I also used smaller "hats" to fill in.


Not quite formed acorns as gap fillers

Break them apart 
Once you have glue all the "hats" on, Spray with clear coat (I did two coats of clear because I used Satin finish.) Let Dry....

Using the glitter glue I squeezed some glue around the top of a few hats, then with a paintbrush, painted it all around the edges. Continue squeezing glitter glue and painting on all the "hats" until complete. I swiped the insides of the "hats" with a almost dry brush with just a little glitter glue on it, to just give it a hint of glitter.
Let it dry...You may need to go back and apply to spots that you missed, or to just give it a second coat of glitter, up to you.

Once its dry, tie a 8 inch (approximate) piece of ribbon on the hook for the hanging ribbon, and knot it. With a 12-15 inch (approx.) of ribbon, make a bow and glue it to the ornament, close to the hook, making sure not to glue the hanging ribbon, so it can move freely.



Sorry about the focus on this one, but you can see the glitter pretty good in this shot!

Added new picture 12-25-12 of the ornament on my tree



That was fun!










Tuesday, May 22, 2012

Tips & Tricks



I added another category,  so I switched the name of the post from Craft Tips to Tips & Tricks



Paint/Stencil

**When using a stencil to paint, begin painting on the edges of the stencil, working toward the center, rather than from the center outwards. This helps prevent paint from getting under the edges.


**Apply the lightest color first when stenciling and blend to create multiple color tones.


**Use as little paint as possible when stenciling. Less is more


**When painting on glass be sure to prep the surface first by cleaning it with rubbing alcohol. This will remove any oils on the surface that might keep the paint from sticking to the glass. And after you clean it be sure not to touch the surface as this will transfer oils from your hands.


**After painting, set your brushes in fabric softener for about 10 minutes and then clean as usual. This works for brushes used for all types of paint, even oil based paints. You can also use  hair conditioner after using acrylic paint.


**Recycle large plastic lids by using them for a painter’s palette or cutting them up for stencils. I use a ice cream bucket lids for a palette when I paint.

**5-24-12 
Punch 3 to 4 holes in lip of paint can using a nail. This allows the paint in the lip to drip back into can while allowing the lid to make a better seal keeping the paint fresh.




General

**Keep glue sticks for glue guns in the freezer. It keeps them from getting stringy while gluing.


**Heat from a blow drier causes strings of hot glue to disintegrate immediately.


**Repurpose clear glass jars as containers. Baby food jars are ideal for small items like beads and jewelry-making supplies, medium sized jars can hold buttons and large jars can hold markers and colored pencils.


**Install simple curtain rods or towel bars on one wall of a closet or utility room to hang rolls of wrapping paper.


**Use clear, plastic containers to group similar items - craft supplies are easier to find and use if you can see the contents of the containers that hold them.
**To clean rubber stamps use baby wipes immediately after stamping. Baby wipes are already acid-free and gentle.


**Lubricate craft punches before using them by punching wax paper.


**If your scissors start to go a little blunt, grab some aluminum foil and cut that to sharpen up the scissors, you can also use sand paper for the same effect.


**Shoelaces make perfect drawstrings for small projects, such as bags or children's clothes, and they come in a variety of colors to match any project.

**Store pipe cleaners for kid’s crafts inside of a paper towel tubes




Knitting

**Paperclips make great stitch counters. Just pop one on the stitch you want to mark. Safety pins work great too, and are a little easier to put on and take off.


**If your knitted item tends to curl at the edges, adding a row of single crochet may flatten it out.


Gardening

**To remove the salt deposits that form on clay pots, combine equal parts white vinegar, rubbing alcohol and water in a spray bottle. Apply the mixture to the pot and scrub with a plastic brush. Let the pot dry before you plant anything in it.



 **To create natural markers, write the names of plants (using a permanent marker) on the flat faces of stones of various sizes and place them at or near the base of your plants





I will be adding more tips as I find them...

If you have some favorite craft tips you'd like to share, send me a message,or leave a comment and I'll add them to the list.

Whitfieldshomeinthecountry(at)gmail(dot)com





Total Pageviews

Related Posts Plugin for WordPress, Blogger...